Customer description

The console was sent with a faulty power button. Upon inspection, the fault was tracked to a clock capacitor leak which had corroded traces routing the power button. The clock capacitor was removed, the corrosion cleaned, and the trace that was broken was replaced with a jumper wire, which fixed the problem with the power […]

This service was for a PS3 slim TLC and the installation of a Raspberry Pi provided by the customer for BadWDSD. The console was in relatively good condition although internally there was quite a lot dust and fluff, particularly around the fan and heatsinks. The console was completely disassembled, the plastic parts washed with water

The service was for a recap and TLC (with retrobroighthing) of a PAL Super Nintendo. The console was very yellowed, and on testing, the console wouldn’t boot, or boot with video artifacts most of the time. The customer also reported issues with audio in one of the channels. On disassembly, some substantial leakage was found

The service was for a modchip install and an HDD install. The customer mentioned that they tried to do a hardmod and the console wouldn’t boot. An Aladdin modchip was being used. On inspection, the installation was not adequate and the first step was to cleanup and see what was happening with the pads. The

This order was for the installation of an Xstation in a 5xxx model PS1. The customer sent the Xstation and the console, and I provided the 3D printed mount and the SD card extension. The console came in good condition, PU-18 motherboard. The installation of this mod requires first the lifting of some of the

This order was for the recap of the main board of a Game Cube, for the installation of Retro GEM HDMI kit, and for the replacement of the analog sticks in a PS1 controller Game Cube This console has a GC Loader installed so the optical drive isn’t present. It also has a replaced fan

This order was for the recap and (basic) RGB mod of a Neo Geo AES, and the recap, triple bypass and FRAM modding of a Multi Mega. The customer provided both capacitor kits, as well as flash cart for the Neo Geo. Neo Geo AES The New Geo was in good shape and replacing the

This order was for the USB-C modding, replacement of batteries and of sticks for 2x Xbox 360 controllers and 4x PS3 controllers. Let’s start with the Xbox 360 controllers. One of them didn’t sync to the console, probably due to a faulty switch. However the other one did, and I used the same sticks. The

This order is for the refurbishment / TLC and installation of a Modbo 5.0 modchip for a black PS2, motherboard GH-022 The console was never opened before and had a fair amount of dust and dirt, particularly in the inside. Prior to open it up, PS2 games would play but not PS1 games. The customer

This service was for the recap of a Sega 32x as well as the installation of a region-free mod. The console came with the connection cables to connect to the main console, as well as a Star Wars PAL game. While the console was in a relatively good state externally, internally the console had quite