The service was for the TLC of a black PS2. The customer also sent a new tray, as the one that was installed in the console had the front snapped. The console has somewhat dirty and had also been opened before as the warranty sticker was missing. First step was full disassembly of the console […]
This service was for the installation of a N64 RGB mod, and for the recap and TLC of the console. The RGB mod is a Tim Worthington board, sold by Oldskoolconsoles. The kit comes with cable harness, connector and ribbon cables. The console was overall in good condition. The console was PAL. The customer provided
This order was for the full recap, TLC, BIOS mod and FRAM mod of a Sega Saturn. The customer also requested installation of a Phantom Universal modchip, although later tests showed that the console couldn’t read burnt games so the mochip wasn’t installed. First step was to fully disassemble the console and wash it. The
This order was the recap of a Sega Master System, and for the recap of a 32x and installation of a switchless region-free mod. A previous switch mod was also removed in the process of installing the switchless mod. Master System Nothing much to report apart from an straight forward recap. Some MX-4 thermal paste
The console was sent with a faulty power button. Upon inspection, the fault was tracked to a clock capacitor leak which had corroded traces routing the power button. The clock capacitor was removed, the corrosion cleaned, and the trace that was broken was replaced with a jumper wire, which fixed the problem with the power
This service was for a PS3 slim TLC and the installation of a Raspberry Pi provided by the customer for BadWDSD. The console was in relatively good condition although internally there was quite a lot dust and fluff, particularly around the fan and heatsinks. The console was completely disassembled, the plastic parts washed with water
The service was for a recap and TLC (with retrobroighthing) of a PAL Super Nintendo. The console was very yellowed, and on testing, the console wouldn’t boot, or boot with video artifacts most of the time. The customer also reported issues with audio in one of the channels. On disassembly, some substantial leakage was found
The service was for a modchip install and an HDD install. The customer mentioned that they tried to do a hardmod and the console wouldn’t boot. An Aladdin modchip was being used. On inspection, the installation was not adequate and the first step was to cleanup and see what was happening with the pads. The
This order was for the installation of an Xstation in a 5xxx model PS1. The customer sent the Xstation and the console, and I provided the 3D printed mount and the SD card extension. The console came in good condition, PU-18 motherboard. The installation of this mod requires first the lifting of some of the
This order was for the recap of the main board of a Game Cube, for the installation of Retro GEM HDMI kit, and for the replacement of the analog sticks in a PS1 controller Game Cube This console has a GC Loader installed so the optical drive isn’t present. It also has a replaced fan
